StarlingX/Docs and Infra/InstallationGuides/virtual-Controllers-and-Computes-with-Storage-Cluster
< StarlingX | Docs and Infra | InstallationGuides
Revision as of 00:54, 15 August 2019 by Greg-waines (talk | contribs) (→Preparing the Virtual Environment and Servers)
Contents
Deployment Diagram
Standard with Storage Cluster Diagram
Physical Host Requirements
ToDo - Same as AIO-SIMPLEX
Hardware Requirements
ToDo - Same as AIO-SIMPLEX
Software Requirements
ToDo - Same as AIO-SIMPLEX
Setting up the Host
ToDo - Same as AIO-SIMPLEX
Preparing the Virtual Environment and Servers
Setup virtual platform networks for virtual deployment:
bash setup_network.sh
Create the XML definitions for the virtual servers required by this configuration option.
This will create the XML virtual server definition for:
- dedicatedstorage-controller-0
- dedicatedstorage-controller-1
- dedicatedstorage-storage-0
- dedicatedstorage-storage-1
- dedicatedstorage-compute-0
- dedicatedstorage-compute-1
The following command will also start the X-based graphical virt-manager application; if their is no X-server present then errors will occur.
The following command will also start/virtually-powered-on the 'simplex-controller-0' virtual server.
bash setup_configuration.sh -c dedicatedstorage -i ./bootimage.iso
StarlingX Kubernetes
ToDo
Installing StarlingX Kubernetes
ToDo
Accessing StarlingX Kubernetes
ToDo
StarlingX OpenStack
ToDo
Installing StarlingX OpenStack
ToDo
Accessing StarlingX OpenStack
ToDo