Ml2 conf.ini File
[ml2]
# (ListOpt) List of network type driver entrypoints to be loaded from # the neutron.ml2.type_drivers namespace. # # type_drivers = local,flat,vlan,gre,vxlan # Example: type_drivers = flat,vlan,gre,vxlan type_drivers = vlan # (ListOpt) Ordered list of network_types to allocate as tenant # networks. The default value 'local' is useful for single-box testing # but provides no connectivity between hosts. # # tenant_network_types = local # Example: tenant_network_types = vlan,gre,vxlan tenant_network_types = vlan # (ListOpt) Ordered list of networking mechanism driver entrypoints # to be loaded from the neutron.ml2.mechanism_drivers namespace. # mechanism_drivers = # Example: mechanism_drivers = openvswitch,mlnx # Example: mechanism_drivers = arista # Example: mechanism_drivers = cisco,logger # Example: mechanism_drivers = openvswitch,brocade # Example: mechanism_drivers = linuxbridge,brocade #mechanism_drivers = openvswitch mechanism_drivers = openvswitch,omniswitch [ml2_type_flat] # (ListOpt) List of physical_network names with which flat networks # can be created. Use * to allow flat networks with arbitrary # physical_network names. # # flat_networks = # Example:flat_networks = physnet1,physnet2 # Example:flat_networks = * [ml2_type_vlan] # (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples # specifying physical_network names usable for VLAN provider and # tenant networks, as well as ranges of VLAN tags on each # physical_network available for allocation as tenant networks. # Multiple ranges can be defined like so: physnet1:1100:1110,physnet1:1001:1010 # # network_vlan_ranges = network_vlan_ranges = physnet1:1100:1110 [ml2_type_gre] # (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges # of GRE tunnel IDs that are available for tenant network allocation # tunnel_id_ranges = [ml2_type_vxlan] # (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating # ranges of VXLAN VNI IDs that are available for tenant network allocation. # # vni_ranges = # (StrOpt) Multicast group for the VXLAN interface. When configured, will # enable sending all broadcast traffic to this multicast group. When left # unconfigured, will disable multicast VXLAN mode. # # vxlan_group = # Example: vxlan_group = 239.1.1.1 [securitygroup] # Controls if neutron security group is enabled or not. # It should be false when you use nova security group. enable_security_group = True firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver [ovs] bridge_mappings = physnet1:br-em1 network_vlan_ranges = physnet1:1100:1110 integration_bridge = br-int tenant_network_type = vlan
