Jump to: navigation, search

Tacker/Installation

< Tacker
Revision as of 02:41, 26 June 2015 by Sridhar Ramaswamy (talk | contribs) (Created page with " == Tacker Installation Guide == 1) Pull Tacker devstack repo git clone -b tacker-devstack https://github.com/srics/devstack Note: This will be transitioned to a devstack p...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Tacker Installation Guide

1) Pull Tacker devstack repo git clone -b tacker-devstack https://github.com/srics/devstack

Note: This will be transitioned to a devstack plugin within tacker repo

2) Pre Installation steps

   Create mgmt provider network L2 bridge,
   sudo ovs-vsctl add-br br-mgmt0

3) Tacker devstack local.conf

* Refer to this sample local.conf 
* Set appropriate phynet / bridge-mapping for br-mgmt0 in the neutron.conf ML2 configuration section

4) Run stack.sh

5) Post Installation steps

  Once successfully stacked up run sample tacker-vnf.sh to configure br-mgmt0 and to create the required neutron network (including the neutron provider network mapped to br-mgmt0)

6) Try creating sample VNFD Catalog and VNF Instances using devstack/exercises/tacker-vnf.sh

Tacker Horizon Installation Guide

This is to be done after successfully installation Tacker as mentioned above

1) Pull Tacker Horizon repo from,

git clone https://github.com/stackforge/tacker-horizon

Follow the README.md instruction to install it on top of horizon (say in /opt/stack/horizon)

Note: once tacker devstack patch is integrated tacker-horizon will be automatically installed when tacker is enabled in devstack

Tacker Usage Guide

7) Follow the examples in tacker-vnf.sh exercise file to try out tacker commands,

https://github.com/srics/devstack/blob/tacker-devstack/exercises/tacker-vnf.sh

8) If command-line tacker works fine, try out Tacker using Horizon (NFV left menu entry)