The idea is to meter this as the L3 routers levels. The point is to allow operators to configure IP ranges and to assign a label to them. For example we will be able to set two labels; one for the internal traffic, and the other one for the external traffic. Each label will measure the traffic for a specific set of ip range. Then, bandwidth measurement will be send for each label to the Oslo notification system and could be collected by Ceilometer.
The metering of the bandwidth can be realized by set up some IPtables rules on each l3 namespaces.
- Add a global rule for the metering on the FORWARD chain of each router.
- Add rules to the metering chain for each traffic that we want to measure.
- These rules will point to a specific chain used to collect the traffic (packets, bytes). This chain will represent the metering label.
- Add an agent to get the bandwidth information from IPtables chain. This agent will populate bandwidth usage informations as delta with the Oslo notifications mechanism.
Iptables Chain Model
The packet will be set as MARK in order to avoid to count them twice.
The implementation of this extension follow the next plan:
1. Add metering chain to IPtables at the router creation
2. L3 Agent modifications
3. Database model and API modifications
4. Add new command to CLI
Creation of a metering label :
# quantum metering-label-create NAME
Add some rules to this label :
# quantum metering-label-rule-create METERING_LABEL_ID REMOTE_IP_PREFIX --direction egress --excluded=true
Associate a router with this metering label :
# quantum metering-label-association-create METERING_LABEL_ID ROUTER_ID
Only admin user will be authorized to manipulate the metering labels/rules/associations.
This extension will be added to the OVS plugin to begin.