Jump to: navigation, search

Difference between revisions of "Mellanox-Neutron-Kilo-Redhat-InfiniBand"

(Compute Nodes)
(Compute Nodes)
Line 132: Line 132:
 
#yum install -y openstack-neutron-mellanox eswitchd python-networking-mlnx mlnx-dnsmasq
 
#yum install -y openstack-neutron-mellanox eswitchd python-networking-mlnx mlnx-dnsmasq
 
</pre>
 
</pre>
 
  
 
3. Edit the following file: /usr/lib/systemd/system/neutron-mlnx-agent.service
 
3. Edit the following file: /usr/lib/systemd/system/neutron-mlnx-agent.service
<pre>  
+
<pre>
 
Change the  /etc/neutron/plugins/mlnx/mlnx.ini to /etc/neutron/plugins/mlnx/mlnx_conf.ini
 
Change the  /etc/neutron/plugins/mlnx/mlnx.ini to /etc/neutron/plugins/mlnx/mlnx_conf.ini
 
</pre>
 
</pre>

Revision as of 15:08, 14 July 2015

Overview

Mellanox Neutron ML2 Driver

Mellanox ML2 Mechanism Driver implements the ML2 Plugin Mechanism Driver API.

This driver supports Mellanox embedded switch functionality as part of the VPI (Ethernet/InfiniBand) HCA. Mellanox ML2 Mechanism Driver provides functional parity with Mellanox Neutron plugin.

Mellanox ML2 Mechanism Driver supports DIRECT (pci passthrough) vnic type. For vnic type configuration API details, please refer to configuration reference guide (click here). Hardware vNICs mapped to the guest VMs allow higher performance and advanced features such as RDMA (remote direct memory access).

The driver supports VLAN network type to facilitate virtual networks either on Ethernet or InfiniBand fabrics.

  • Mellanox OpenStack Neutron Agent (L2 Agent) runs on each compute node.
  • Agent should apply VIF connectivity based on mapping between a VIF (VM vNIC) and Embedded Switch port.

Prerequisites

 yum-config-manager --add-repo http://www.mellanox.com/repository/solutions/openstack/kilo/rhel7/ 

InfiniBand Network

The Mellanox Neutron Plugin use InfiniBand Partitions (PKeys) to separate Networks.

SM Node

OpenSM Configuration – Without UFM

To configure OpenSM:

1. Make sure that all the PKeys are predefined in the partitions.conf file (/etc/opensm/partitions.conf).

2. Add/Change the following in the partitions.conf file:

management=0xffff,ipoib, sl=0, defmember=full: ALL, ALL_SWITCHES=full,SELF=full;

3. For every network you want to configure in Neutron, you have to configure the PKey associated with the VLAN of this network (defined in Neutron): vlan1=0x1, ipoib, sl=0, defmember=full : ALL;

Below is an example of the configuration of the partitions.conf file in case you have 10 VLANs defined in the configuration of the file: /etc/neutron/plugins/mlnx/mlnx_conf.ini. ( network_vlan_ranges = physnet1:1:10)

management=0x7fff,ipoib, sl=0, defmember=full : ALL, ALL_SWITCHES=full,SELF=full;
vlan1=0x1, ipoib, sl=0, defmember=full: ALL_CAS;
vlan2=0x2, ipoib, sl=0, defmember=full: ALL_CAS;
vlan3=0x3, ipoib, sl=0, defmember=full: ALL_CAS;
vlan4=0x4, ipoib, sl=0, defmember=full: ALL_CAS;
vlan5=0x5, ipoib, sl=0, defmember=full: ALL_CAS;
vlan6=0x6, ipoib, sl=0, defmember=full: ALL_CAS;
vlan7=0x7, ipoib, sl=0, defmember=full: ALL_CAS;
vlan8=0x8, ipoib, sl=0, defmember=full: ALL_CAS;
vlan9=0x9, ipoib, sl=0, defmember=full: ALL_CAS;
vlan10=0xa, ipoib, sl=0, defmember=full: ALL_CAS;

4. Modify the following line in the file /etc/opensm/opensm.conf from FALSE to TRUE:

allow_both_pkeys TRUE

5. Restart the OpenSM:

#systemctl restart opensmd.service

Controller Node

To configure the Controller node: 1.Configure yum with Mellanox OpenStack Kilo repository

#yum repo http://www.mellanox.com/repository/solutions/openstack/kilo/rhel7

2. Install Mellanox RPMs:

modify gpgcheck=0 in /etc/yum.conf
#yum install -y openstack-neutron-mellanox eswitchd python-networking-mlnx mlnx-dnsmasq


3. Edit the following file: /usr/lib/systemd/system/neutron-mlnx-agent.service

 
Change the  /etc/neutron/plugins/mlnx/mlnx.ini to /etc/neutron/plugins/mlnx/mlnx_conf.ini

4. Run:

 #systemctl enable neutron-mlnx-agent.service

5. Run:

 #systemctl daemon-reload

6. Make sure ML2 is the current Neutron plugin by checking the core_plugin parameter in /etc/neutron/neutron.conf:

core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin

7. Make sure /etc/neutron/plugin.ini is pointing to /etc/neutron/plugins/ml2/ml2_conf.ini (symbolic link)

8. Modify /etc/neutron/plugins/ml2/ml2_conf.ini by adding the following:

[ml2]
type_drivers = vlan,flat
tenant_network_types = vlan
mechanism_drivers = mlnx, openvswitch
# or mechanism_drivers = mlnx, linuxbridge
[ml2_type_vlan]
network_vlan_ranges = <network_name>:2:100
[eswitch]
# (StrOpt) Type of Network Interface to allocate for VM:
# mlnx_direct or hostdev according to libvirt terminology
vnic_type = hostdev

9. Start (or restart) the Neutron server:

#systemctl restart neutron-server.service

Compute Nodes

To configure the Compute Node:

1.Configure yum with Mellanox OpenStack Kilo repository

#yum repo http://www.mellanox.com/repository/solutions/openstack/kilo/rhel7

2. Install Mellanox RPMs:

modify gpgcheck=0 in /etc/yum.conf
#yum install -y openstack-neutron-mellanox eswitchd python-networking-mlnx mlnx-dnsmasq

3. Edit the following file: /usr/lib/systemd/system/neutron-mlnx-agent.service

Change the  /etc/neutron/plugins/mlnx/mlnx.ini to /etc/neutron/plugins/mlnx/mlnx_conf.ini

4. Run:

 #systemctl enable neutron-mlnx-agent.service

5. Run:

 #systemctl daemon-reload

6. Apply MLNX patch for Kilo:

 #pushd /usr/lib/python2.7/site-packages/nova/virt/libvirt/ 
 #wget http://www.mellanox.com/repository/solutions/openstack/kilo/rhel7/patch/mlnx_kilo.patch
 #patch < mlnx_kilo.patch
 #popd

7. Create the file /etc/modprobe.d/mlx4_ib.conf and add the following:

options mlx4_ib sm_guid_assign=0

8. Restart Nova:

 #systemctl restart openstack-nova-compute

9. Restart the driver:

 # /bin/systemctl restart opensm.service
 # /etc/init.d/openibd restart

10. In the file /etc/neutron/plugins/mlnx/mlnx_conf.ini, the parameters tenant_network_type , and network_vlan_ranges should be configured as the controllers:

physical_interface_mappings = physnet1:<ib_interface>(for example physnet1:ib0)

11. Modify the file /etc/eswitchd/eswitchd.conf as follows:

 fabrics = physnet1:<ib_interface> (for example physnet1:ib0)

12. Start eSwitchd:

 #systemctl restart eswitchd

13. Start the Neutron agent:

 #systemctl restart neutron-mlnx-agent

Network Node

To configure the Network node:

1. Make sure that eIPoIB module is up and configured in /etc/infiniband/openib.conf: For more information, please refer to eIPoIB configuration in Mellanox OFED User Manual.

E_IPOIB_LOAD=yes

2. Restart openibd:

#service openibd restart

3. Modify the file /etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini as follows:

[linux_bridge] 
physical_interface_mappings = physnet1:<eIPoIB interface>
 

if you are using openvswitch than modify /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini

[ovs]
bridge_mappings = physnet1:br-<eIPoIB interface>

NOTE: In order to obtain the eIPoIB interface name, run the ethtool tool command (see below) and check that driver name is eth_ipoib:

#ethtool -i <eIPoIB_interface> 
driver: eth_ipoib
version: 1.0.0
firmware-version: 1 
bus-info: ib0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

4. Restart neutron-linuxbridge-agent and neutron-dhcp-agent:

#systemctl restart neutron-linuxbridge-agent.service
#systemctl restart neutron-openvswitch-agent.service

NOTE: For DHCP support, the Network node should use the Mellanox Dnsmasq driver as the DHCP driver.

DHCP Server (Usually part of the Network node)

1. Modify /etc/neutron/dhcp_agent.ini as follows and according to OVS or Linuxbridge:

 dhcp_driver = mlnx_dhcp.MlnxDnsmasq
 dhcp_broadcast_reply = True
#or interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver
interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver

2. Start DHCP server:

#systemctl restart neutron-dhcp-agent.service

Known issues and Troubleshooting

For known issues and troubleshooting options refer to Mellanox OpenStack Troubleshooting