Mellanox-Neutron-Kilo-Redhat-Ethernet
Revision as of 13:40, 21 July 2015 by Lenny Verkhovsky (talk | contribs)
Contents
Ethernet Configuration with Mellanox
SR-IOV Networking in OpenStack Juno/Kilo
OpenStack Juno adds inbox support to request VM access to virtual network via SR-IOV NIC. With the introduction of SR-IOV based NICs, the traditional virtual bridge is no longer required. Each SR-IOV port is associated with a virtual function (VF). SR-IOV ports may be provided by Hardware-based Virtual Ethernet Bridging (HW VEB); or they may be extended to an upstream physical switch (IEEE 802.1br). There are two ways that SR-IOV port may be connected:
- directly connected to its VF
- connected with a macvtap device that resides on the host, which is then connected to the corresponding VF