How to run custom horizon with manila

This page describes how to try manila with horizon. It can be done on any host, not exactly the same as devstack installation.

Get custom horizon

$ git clone -b manila_juno https://github.com/NetApp/horizon.git

$ cd horizon

$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py

open file openstack_dashboard/local/local_settings.py

find var "OPENSTACK_HOST" and set here address of host where devstack was installed

save and exit

run in horizon's dir

$ sudo python setup.py install

Also, need to install python-manilaclient

$ sudo pip install git+https://github.com/openstack/python-manilaclient.git

$ sudo python manage.py runserver

it will be available on 127.0.0.1:8000

to specify all interfaces, use:

$ sudo python manage.py runserver 0.0.0.0:8000

port can be set to any not used valid port value.