Jump to: navigation, search

Manila/docs/HOWTO use manila with horizon

< Manila‎ | docs
Revision as of 16:10, 3 April 2014 by Vponomaryov (talk | contribs) (How to run custom horizon with manila)

How to run custom horizon with manila

This page describes how to try manila with horizon. It can be done on any host, not exactly the same as devstack installation.

Get custom horizon

$ git clone -b manila https://github.com/NetApp/horizon.git
$ cd horizon
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py

open file openstack_dashboard/local/local_settings.py

find var "OPENSTACK_HOST" and set here address of host where devstack was installed

save and exit

Be sure, all dependencies are installed

run in horizon's dir

$ sudo python setup.py install

Also, need to install python-manilaclient

$ sudo pip install git+https://github.com/stackforge/python-manilaclient.git

Run horizon

$ sudo python manage.py runserver

it will be available on

to specify all interfaces, use:

$ sudo python manage.py runserver

port can be set to any not used valid port value.