Difference between revisions of "Manila/docs/HOWTO use manila with horizon"
Vponomaryov (talk | contribs) (Created page with "= How to run custom horizon with manila = ==Get custom horizon== $ git clone -b manila https://github.com/NetApp/horizon.git $ cd horizon $ cp openstack_dashboard/local/...") |
Vponomaryov (talk | contribs) (→Get custom horizon) |
||
Line 8: | Line 8: | ||
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py | $ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py | ||
− | open file openstack_dashboard/local/local_settings.py | + | open file '''''openstack_dashboard/local/local_settings.py''''' |
− | find var "OPENSTACK_HOST" and set here address of host where devstack was installed | + | find var "''OPENSTACK_HOST''" and set here address of host where devstack was installed |
save and exit | save and exit |
Revision as of 16:03, 3 April 2014
Contents
How to run custom horizon with manila
Get custom horizon
$ git clone -b manila https://github.com/NetApp/horizon.git
$ cd horizon
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py
open file openstack_dashboard/local/local_settings.py
find var "OPENSTACK_HOST" and set here address of host where devstack was installed
save and exit
Be sure, all dependencies are installed
run in horizon's dir
$ sudo python setup.py install
Also, need to install python-manilaclient
$ sudo pip install git+https://github.com/stackforge/python-manilaclient.git
Run horizon
$ sudo python manage.py runserver
it will be available on 127.0.0.1:8000
to specify all interfaces, use:
$ sudo python manage.py runserver 0.0.0.0:8000
port can be set to any not used valid port value.