Difference between revisions of "Manila/docs/HOWTO use manila with horizon"
Vponomaryov (talk | contribs) (→How to run custom horizon with manila) |
(→Be sure, all dependencies are installed) |
||
| Line 24: | Line 24: | ||
Also, need to install python-manilaclient | Also, need to install python-manilaclient | ||
| − | $ sudo pip install git+https://github.com/ | + | $ sudo pip install git+https://github.com/openstack/python-manilaclient.git |
==Run horizon== | ==Run horizon== | ||
Revision as of 12:45, 24 September 2014
Contents
How to run custom horizon with manila
This page describes how to try manila with horizon. It can be done on any host, not exactly the same as devstack installation.
Get custom horizon
$ git clone -b manila https://github.com/NetApp/horizon.git
$ cd horizon
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py
open file openstack_dashboard/local/local_settings.py
find var "OPENSTACK_HOST" and set here address of host where devstack was installed
save and exit
Be sure, all dependencies are installed
run in horizon's dir
$ sudo python setup.py install
Also, need to install python-manilaclient
$ sudo pip install git+https://github.com/openstack/python-manilaclient.git
Run horizon
$ sudo python manage.py runserver
it will be available on 127.0.0.1:8000
to specify all interfaces, use:
$ sudo python manage.py runserver 0.0.0.0:8000
port can be set to any not used valid port value.
