Difference between revisions of "Manila/docs/HOWTO use manila with horizon"
Vponomaryov (talk | contribs) (→Get custom horizon) |
Vponomaryov (talk | contribs) (→Get custom horizon) |
||
Line 4: | Line 4: | ||
==Get custom horizon== | ==Get custom horizon== | ||
− | $ git clone -b manila_juno https://github.com/NetApp/horizon.git | + | $ git clone -b manila_juno https://github.com/NetApp/horizon.git # Horizon of Juno version with Manila support, recommended |
− | + | or | |
+ | $ git clone -b manila_icehouse https://github.com/NetApp/horizon.git # Horizon of Icehouse version with Manila support. Old, not recommended | ||
+ | and | ||
$ cd horizon | $ cd horizon | ||
− | + | and | |
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py | $ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py | ||
Revision as of 12:10, 3 October 2014
Contents
How to run custom horizon with manila
This page describes how to try manila with horizon. It can be done on any host, not exactly the same as devstack installation.
Get custom horizon
$ git clone -b manila_juno https://github.com/NetApp/horizon.git # Horizon of Juno version with Manila support, recommended
or
$ git clone -b manila_icehouse https://github.com/NetApp/horizon.git # Horizon of Icehouse version with Manila support. Old, not recommended
and
$ cd horizon
and
$ cp openstack_dashboard/local/local_settings.py.example openstack_dashboard/local/local_settings.py
open file openstack_dashboard/local/local_settings.py
find var "OPENSTACK_HOST" and set here address of host where devstack was installed
save and exit
Be sure, all dependencies are installed
run in horizon's dir
$ sudo python setup.py install
Also, need to install python-manilaclient
$ sudo pip install git+https://github.com/openstack/python-manilaclient.git
Run horizon
$ sudo python manage.py runserver
it will be available on 127.0.0.1:8000
to specify all interfaces, use:
$ sudo python manage.py runserver 0.0.0.0:8000
port can be set to any not used valid port value.