Difference between revisions of "Mellanox-Quantum"
Ophir Maor (talk | contribs) (→Configuring Partitions) |
Ophir Maor (talk | contribs) (→Configuring Partitions) |
||
Line 350: | Line 350: | ||
net9=0x9, ipoib, sl=0, defmember=full : SELF; | net9=0x9, ipoib, sl=0, defmember=full : SELF; | ||
net10=0xa, ipoib, sl=0, defmember=full : SELF; | net10=0xa, ipoib, sl=0, defmember=full : SELF; | ||
+ | |||
+ | Change the following in /etc/opensm/opensm.conf: | ||
+ | part_enforce both | ||
+ | |||
Restart the openSM | Restart the openSM |
Revision as of 07:13, 28 August 2013
Contents
Overview
Mellanox Quantum Plugin
The Openstack Mellanox Quantum plugin supports Mellanox embedded switch functionality as part of the VPI (Ethernet/InfiniBand) HCA. Mellanox Quantum Plugin allows hardware vNICs (based on SR-IOV virtual functions) per each Virtual Machine vNIC to have its unique connectivity, security, and QoS attributes. Hardware vNICs can be mapped to the guest VMs through para-virtualization (using a Tap device), or directly as a Virtual PCI device to the guest, allowing higher performance and advanced features such as RDMA (remote direct memory access).
Hardware-based switching, provides better performance, functionality, and security/isolation for virtual cloud environments. Future versions of the plug-in will include OpenFlow API to control and monitor the embedded switch and vNICs functionality
This plugin is implemented according to Plugin-Agent pattern.
+-----------------+ +--------------+ | Controller node | | Compute node | +-----------------------------------+ +-----------------------------------+ | +-----------+ +----------+ | | +----------+ +----------+ | | | | | | | | | | zmq | | | | | Openstack | v2.0 | Mellanox | | RPC | | Mellanox |REQ/REP| Mellanox | | | | Quantum +------+ Quantum +-----------+ Quantum +-------+ Embedded | | | | | | Plugin | | | | Agent | | Switch | | | | | | | | | | | | (NIC) | | | +-----------+ +----------+ | | +----------+ +----------+ | +-----------------------------------+ +-----------------------------------+
- Openstack Mellanox Quantum Plugin implements the Quantum v2.0 API.
- Mellanox Quantum Plugin processes the Quantum API calls and manages network segmentation ID allocation.
- The plugin uses databases to store configuration and allocation mapping.
- The plugin maintains compatibility to Linux Bridge Plugin, supports DHCP and L3 Agents by running L2 Linux Bridge Agent on Network Node.
- Mellanox Openstack Quantum Agent (L2 Agent) runs on each compute node.
- Agent should apply VIF connectivity based on mapping between a VIF (VM vNIC) and Embedded Switch port.
Mellanox Nova VIF Driver
The Mellanox Nova VIF driver should be used when running Mellanox Quantum Plugin. This driver supports the VIF plugin by binding vNIC (para-virtualized or SR-IOV with optional RDMA guest access) to the embedded switch port.
Prerequisites
The following are the Mellanox Quantum Plugin prerequisites:
1. The software package python-zmq (github) must be installed. EPEL repository can be used as well.
2. python-setuptools (use "yum install python-setuptools")
3. python-pip (use "yum install python-pip")
Prerequisites only for Compute Servers :
1. RH 6.3 or above.
2. Compute nodes should be equiped with Mellanox ConnectX®-3 Network Adapter (link)
3. Mellanox OFED 2.0.3 is installed. Contact openstack@mellanox.com to retreive this version. Refer to Mellanox website for the latest OFED documentation (link)
4. Enable SR-IOV on ConnectX-3 card. Refer to Mellanox Community
5. The software package iproute2 - (Code Documentation) must be installed. Reuired only to be installed on compute nodes
6. The software package ethtool (Code) must be installed (version 3.8 or higher). Required only to be installed on compute nodes.
7. oslo.config (use "pip-python install oslo.config"). Reuired only to be installed on compute nodes.
8. python-ethtool and python-zmq packages
Installation with RHOS
For each section refer to 'Installation via RPMs'. No additional Prerequisites except for those required by RHOS.
Please refer to http://www.redhat.com/products/enterprise-linux/openstack-platform For additional information regarding RHOS.
Code Structure
Mellanox Quantum Plugin and the Nova VIF driver are located at Mellanox OpenStack RPMs
1. Quantum Plugin package structure:
quantum/etc/quantum/plugins/mlnx -plugin configuration mlnx_conf.ini - sample plugin configuration
quantum/quantum/plugins/mlnx - plugin code /agent - Agent code /common - common code /db - plugin persistency model and wrapping methods mlnx_plugin.py - Mellanox Openstack Plugin rpc_callbacks.py - RPC handler for received messages agent_notify_api.py - Agent RPC notify methods
Mellanox Quantum Plugin is located under quantum/quantum/plugins/.
2. Nova VIF driver package structure is:
nova/nova/mlnx - nova vif driver code
Mellanox Nova VIF driver is located under nova/virt/libvirt/mlnx.
Mellanox Quantum Plugin Installation (for Grizzly)
On the Controller Node
In /etc/nova/nova.conf ensure you have the following line:
security_group_api=nova
If you changed it - Restart the Nova services (e.g. cd /etc/init.d && for i in $( ls nova-*); do service $i restart; done)
On the Quantum Server Node
Creating MySQL database for Quantum Server
Quantum server uses MySQL database. Make sure you have running MySQL database for quantum.
If Quantum server is already running, you should stop it.
#/etc/init.d/quantum-server stop
If you want to use a database that was created you have to drop it and create another one. For example:
mysql -u root -ppassword <<EOF drop database if exists quantum; create database quantum; EOF
If you want to create a new one:
mysql -u root -ppassword <<EOF drop database if exists quantum; create database quantum; GRANT ALL PRIVILEGES ON quantum.* TO 'quantum'@'localhost' IDENTIFIED BY 'password'; GRANT ALL PRIVILEGES ON quantum.* TO 'quantum' IDENTIFIED BY 'password'; FLUSH PRIVILEGES; EOF
Installation via RPMs - for RH6.3 and above
1. Download the Mellanox Quantum Plugin RPM from Mellanox Community OpenStack PRMs for Grizzly
#wget http://www.mellanox.com/downloads/solutions/openstack/grizzly/0.3/openstack-quantum-mlnx-2013.1.2-3.el6.noarch.rpm
2. Install the required RPMs for the Quantum server:
#yum install openstack-quantum-mlnx-2013.1.2-3.el6.noarch.rpm
3. Modify the /etc/quantum/quantum.conf file.
core_plugin = quantum.plugins.mlnx.mlnx_plugin.MellanoxEswitchPlugin
4. Modify the /etc/quantum/plugins/mlnx/mlnx_conf.ini file to reflect your environment. Click here for configuration options.
5. Change the soft link to the plugin configuration (plugin.ini)
#unlink /etc/quantum/plugin.ini #ln -s /etc/quantum/plugins/mlnx/mlnx_conf.ini /etc/quantum/plugin.ini
6. Start the quantum server
#/etc/init.d/quantum-server start
Manual installation - for other OS.
1. Make sure the Quantum server is installed and is stopped
#/etc/init.d/quantum-server stop
2. Copy Mellanox OpenStack plugin to the installed quantum plugin directory (usually /usr/lib/python2.7/dist-packages/quantum/plugins).
#git clone https://github.com/mellanox-openstack/mellanox-quantum-plugin #cd mellanox-quantum-plugin #git checkout v0.3 #cp -a quantum/quantum/plugins/mlnx /usr/lib/python2.7/dist-packages/quantum/plugins
3. Modify the /etc/quantum/quantum.conf file.
core_plugin = quantum.plugins.mlnx.mlnx_plugin.MellanoxEswitchPlugin
4. Copy the Mellanox plugin configuration.
#mkdir -p /etc/quantum/plugins/mlnx #cp quantum/etc/quantum/plugins/mlnx/mlnx_conf.ini /etc/quantum/plugins/mlnx
5. Modify the /etc/quantum/plugins/mlnx/mlnx_conf.ini file to reflect your environment. Click here for configuration options.
6. If you run the Quantum server using init script - change the quantum server configuration to point to Mellanox Quantum Plugin
For example, In Ubuntu change /etc/default/quantum-server
QUANTUM_PLUGIN_CONFIG="/etc/quantum/plugins/mlnx/mlnx_conf.ini"
7 . Run the server.
#quantum-server --config-file /etc/quantum/quantum.conf --config-file /etc/quantum/plugins/mlnx/mlnx_conf.ini
or
#/etc/init.d/quantum-server start
On Compute Nodes
The eswitchd Daemon
1. Download the eswitchd RPM:
#wget http://www.mellanox.com/downloads/solutions/openstack/grizzly/0.3/eswitchd-0.3-1.x86_64.rpm
2. Install the eswitchd RPM:
#yum install eswitchd-0.3-1.x86_64.rpm
3. Configure /etc/eswitchd/eswitchd.conf if needed
Please Refer to Mellanox Community for the eSwitchd installation notes ( click here)
Nova-compute
1. Make sure nova is installed on your server.
2. Download and copy the Nova Mellanox VIF driver.
#git clone https://github.com/mellanox-openstack/mellanox-quantum-plugin #cd mellanox-quantum-plugin #git checkout v0.3 #cp -a nova/nova/virt/libvirt/mlnx /usr/lib/python2.6/site-packages/nova/virt/libvirt
or
#wget https://github.com/mellanox-openstack/mellanox-quantum-plugin/archive/v0.3.tar.gz #tar zxvf v0.3 #cp –a mellanox-quantum-plugin-0.3/nova/nova/virt/libvirt/mlnx /usr/lib/python2.6/site-packages/nova/virt/libvirt
3. Modify /etc/nova/nova.conf
compute_driver=nova.virt.libvirt.driver.LibvirtDriver libvirt_vif_driver=nova.virt.libvirt.mlnx.vif.MlxEthVIFDriver fabric=default - specifies physical network for vNICs (currently support one fabric per node) security_group_api=nova
4. Restart Nova.
#/etc/init.d/openstack-nova-compute restart
Quantum Agent
Installation via RPMs - for RH6.3 and above
1. Download the RPMs from Mellanox Community
#wget http://www.mellanox.com/downloads/solutions/openstack/grizzly/0.3/openstack-quantum-mlnx-2013.1.2-3.el6.noarch.rpm
2. Install the required RPMs for the Quantum agent:
#yum install openstack-quantum-mlnx-2013.1.2-3.el6.noarch.rpm
3. Copy the /etc/quantum/quantum.conf file from the Quantum server, and adjust it if needed.
4. Modify the /etc/quantum/plugins/mlnx/mlnx_conf.ini file to reflect your environment. Click here for configuration options.
5. Start eswitch Daemon
#/etc/init.d/eswitchd start
6.. Start the quantum agent
#/etc/init.d/quantum-mlnx-agent start
Note: eswitch Daemon should be running before the Quantum Agent is started.
Mellanox Quantum Plugin Configuration
Quantum Configuration
1. Make the Mellanox plugin the current quantum plugin by editing quantum.conf and changing core_plugin.
core_plugin = quantum.plugins.mlnx.mlnx_plugin.MellanoxEswitchPlugin
2. Database configuration: Install MySQL on the central server. Create a database named "quantum".
3. Plugin configuration: Edit the configuration file: /etc/quantum/plugins/mlnx/mlnx_conf.ini
On central server node
[DATABASE] sql_connection - The parameter should be changed to the connection of the Quantum DB used by the plugin. It must match the mysql configuration. For example: "mysql://quantum:password@127.0.0.1:3306/quantum" reconnect_interval = 2 (default)
[MLNX] tenant_network_type - must be set on of supported tenant network types. Possible values: 'vlan' for Ethernet or 'ib' for Infiniband.'vlan' is the default. network_vlan_ranges - must be configured to specify the names of the physical networks managed by the mellanox plugin, along with the ranges of VLAN IDs available on each physical network for allocation to virtual networks. Possible range is vlan range is 1-4093. The default is "default:1:100" <fabric name >:<vlan range start>:<vlan end range>
On compute node(s)
[AGENT] polling_interval - Polling interval (in seconds) for existing vNICs. The default is 2 seconds. rpc - must be set to 'True'
[ESWITCH] physical_interface_mapping - the network_interface_mappings maps each physical network name to the physical interface (on top of Mellanox Adapter) connecting the node to that physical network. The format of this paramter is: <fabric name>:< PF name> (Only releavant on Compute node). PF Name can either be the PF (Physical Function) Name or 'autoeth' for automatic Ethernet configuration,'autoib' for automatic Infiniband configuration.The default is "default:autoeth". vnic_type - type of VM network interface: 'direct' or 'hostdev' according to libvirt terminology. hostdev: this is the traditional method of assigning any generic PCI device to a guest (SR-IOV). direct: this is a method to provide macvtap device on top of the PCI device (default). bridge: - When using Linux Bridge Plugin on top of eIPoIB device daemon_endpoint - eswitch daemon end point connection (URL) (default value='tcp://127.0.0.1:5001') request_timeout - the number of milliseconds the agent will wait for response on request to daemon. (default=3000 msec)
For a plugin configuration file example (Grizzly), please refer to Mellanox config *ini file.
Nova Configuration (Compute Node(s))
Edit the nova.conf file. 1. Configure the vif driver, and libvirt/vif type
compute_driver=nova.virt.libvirt.driver.LibvirtDriver connection_type=libvirt libvirt_vif_driver=nova.virt.libvirt.mlnx.vif.MlxEthVIFDriver
2. Configure vnic_type ('direct' or 'hostdev'). This will be the default vNIC type when creating a new vNIC. (for example, when using the dashboard it to create new vNIC, this will be the default type.
vnic_type= direct
3. Define the embedded switch-managed physical network (currently single fabric on node).
fabric=default - specifies physical network for vNICs
4. Enable DHCP server to allow VMs to acquire IPs.
quantum_use_dhcp=true
Network Node
Network node equipped with Mellanox Connectx-3 adapter card should be configured as follows:
1. Install Mellanox OFED.
2. Install Quantum linux bridge plugin and Quantum dhcp l3-agent:
#yum install openstack-quantum #yum install openstack-quantum-linuxbridge
3. Change the following configuration of the ini file (/etc/quantum/plugins/linuxbridge/linuxbridge_conf.ini)
physical_interface_mappings = default:eth2 (when eth2 is normally the name for Ethernet interface of Mellanox adapters)
4. Configure the DHCP server accodring to the following guidelines
http://docs.openstack.org/trunk/openstack-network/admin/content/adv_cfg_dhcp_agent.html
5. Start the DHCP server
#/etc/init.d/quantum-dhcp-agent start #/etc/init.d/quantum-linuxbridge-agent start
InfiniBand support
The Mellanox Quantum Plugin use InfiniBand Partitions (PKeys) to seperate Networks.
Configuring Partitions
There are two options to configure InfiniBand partitions
1. Manual configuration: All the PKeys should be predefined in the partitions.conf file (/etc/opensm/partitions.conf)
2. Automatic configuration: (Future)
Add/Change the following in the partitions.conf file
management=0xffff,ipoib, sl=0, defmember=both : ALL, ALL_SWITCHES=full,SELF=full;
For every network you want to configure in Quantum you have to configure the pkey assisicated with the VLAN of this network (defined in Quantum).
net1=0x1, ipoib, sl=0, defmember=full : SELF;
For example: If we have this configuration in /etc/quantum/plugins/mlnx/mlnx_conf.ini
[MLNX] network_vlan_ranges = default:1:10
We'll have the following configuration of the the partitions.conf file:
management=0xffff,ipoib, sl=0, defmember=both : ALL, ALL_SWITCHES=full,SELF=full; net1=0x1, ipoib, sl=0, defmember=full : SELF; net2=0x2, ipoib, sl=0, defmember=full : SELF; net3=0x3, ipoib, sl=0, defmember=full : SELF; net4=0x4, ipoib, sl=0, defmember=full : SELF; net5=0x5, ipoib, sl=0, defmember=full : SELF; net6=0x6, ipoib, sl=0, defmember=full : SELF; net7=0x7, ipoib, sl=0, defmember=full : SELF; net8=0x8, ipoib, sl=0, defmember=full : SELF; net9=0x9, ipoib, sl=0, defmember=full : SELF; net10=0xa, ipoib, sl=0, defmember=full : SELF;
Change the following in /etc/opensm/opensm.conf:
part_enforce both
Restart the openSM
#/etc/init.d/opensmd restart
Configuring Qunatum Server and Compute Nodes
Para-Virtualized
SR-IOV
Configuring Network Node
Usage Examples
- In order to create SR-IOV interface refer to Mellanox OpenStack solution document "Creating an SR-IOV Instance" chapter
- In order to create Para-Virtualized interface refer to Mellanox OpenStack solution document "Creating a Para-Virtualized vNIC Instance" chapter
References
1. http://www.mellanox.com/openstack/
4. Mellanox OpenStack Solution Reference Architecture
For more details, please refer your question to openstack@mellanox.com
Return to Mellanox-OpenStack wiki page.