Difference between revisions of "Mellanox-Neutron-Havana-Ubuntu"
(→Configuration: Fix for rootwrap configuration) |
(→Network Node: Add note about configuration of the L3 & metadata agents) |
||
Line 163: | Line 163: | ||
physical_interface_mappings = default:eth2 | physical_interface_mappings = default:eth2 | ||
− | 4. Configure the DHCP | + | 4. Configure the DHCP agent according to the following guidelines |
Update the following file: /etc/neutron/dhcp_agent.ini with: | Update the following file: /etc/neutron/dhcp_agent.ini with: | ||
Line 169: | Line 169: | ||
interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver | interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver | ||
− | For additional information refer to | + | For additional information refer to the [http://docs.openstack.org/trunk/openstack-network/admin/content/adv_cfg_dhcp_agent.html OpenStack documentation] |
− | 5. Start the Neutron Linux Bridge and | + | 5. Configure the L3 agent according to the following guidelines |
+ | |||
+ | Update the following file: /etc/neutron/l3_agent.ini with: | ||
+ | [DEFAULT] | ||
+ | interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver | ||
+ | |||
+ | For additional information refer to the [http://docs.openstack.org/admin-guide-cloud/content/ch_networking.html#section_adv_cfg_l3_agent OpenStack documentation] | ||
+ | |||
+ | 6. Configure the Metadata agent according to the [http://docs.openstack.org/admin-guide-cloud/content/ch_networking.html#nova_config_metadata OpenStack documentation] | ||
+ | |||
+ | 7. Start the Neutron Linux Bridge, DHCP and L3 agents | ||
# restart neutron-plugin-linuxbridge-agent | # restart neutron-plugin-linuxbridge-agent | ||
# restart neutron-dhcp-agent | # restart neutron-dhcp-agent | ||
+ | # restart neutron-l3-agent | ||
+ | # restart neutron-metadata-agent |
Revision as of 15:17, 24 February 2014
Contents
Overview
This wiki page describes how to tune Mellanox OpenStack on Ubuntu 12.04 servers
Prerequisites
You need at least 3 nodes:
- Controller node running the neutron-server service.
- Compute node running the eswitchd, nova-compute & neutron-plugin-mlnx-agent services.
- Network node running the neutron-plugin-linuxbridge-agent, neutron-dhcp-agent and neutron-l3-agent services.
Ethernet Network
Controller Node
In /etc/nova/nova.conf ensure you have the following line:
security_group_api=nova
If you change, restart the nova services
# for i in $(initctl list | grep '^nova' | awk '{print $1}'); do service $i restart; done
Neutron Server Node
Installation
1. Neutron server uses MySQL database. Make sure you have running MySQL database for neutron.
If Neutron server is already running, you should stop it.
#/etc/init.d/neutron-server stop
If you want to use a database that was created you have to drop it and create another one. For example:
mysql -u root -ppassword <<EOF drop database if exists neutron; create database neutron; EOF
If you want to create a new one:
mysql -u root -ppassword <<EOF drop database if exists neutron; create database neutron; GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' IDENTIFIED BY 'password'; GRANT ALL PRIVILEGES ON neutron.* TO 'neutron' IDENTIFIED BY 'password'; FLUSH PRIVILEGES; EOF
2. Install the required Deb for the Mellanox Neutron plugin:
apt-get install -y neutron-plugin-mlnx-agent
3. Modify the /etc/neutron/plugins/mlnx/mlnx_conf.ini file to reflect your environment.
4. Change /etc/default/neutron-server :
NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/mlnx/mlnx_conf.ini"
Configuration
1. Make the Mellanox plugin the current Neutron plugin by editing neutron.conf and changing core_plugin.
core_plugin = neutron.plugins.mlnx.mlnx_plugin.MellanoxEswitchPlugin
2. Plugin configuration: Edit the configuration file: /etc/neutron/plugins/mlnx/mlnx_conf.ini
[MLNX] tenant_network_type - must be set on of supported tenant network types. Possible values: 'vlan' for Ethernet or 'ib' for Infiniband.'vlan' is the default. network_vlan_ranges - must be configured to specify the names of the physical networks managed by the mellanox plugin, along with the ranges of VLAN IDs available on each physical network for allocation to virtual networks. Possible range is vlan range is 1-4093. The default is "default:1:100" <fabric name >:<vlan range start>:<vlan end range>
[agent] rpc_support_old_agents = True Note: rpc_support_old_agents should be set to 'True' (non default).
Start Services
Start (or restart) the Neutron server
#/etc/init.d/neutron-server start
Compute Nodes
Installation
1. If you didn't download Mellanox OpenStack debian files download it :
http://www.mellanox.com/downloads/solutions/openstack/
2. Install the eswitchd RPM:
dpkg -i eswitchd_0.6-1_amd64.deb dpkg -i python-mlnxvif_0.6-1_all.deb apt-get install -f # fix dependencies apt-get install -y neutron-plugin-mlnx-agent
3. In case you would like to use Ethernet in para-virtualized mode the VIF driver is already included in Nova package. Otherwise, Install Mellanox VIF driver (Make sure nova is installed on your server)
Configuration
1. Configure /etc/eswitchd/eswitchd.conf if needed
Please Refer to Mellanox Community for the eSwitchd installation notes ( click here)
2. Modify /etc/nova/nova.conf
compute_driver=nova.virt.libvirt.driver.LibvirtDriver libvirt_vif_driver=mlnxvif.vif.MlxEthVIFDriver security_group_api=nova connection_type=libvirt
In case you didn't install the Mellanox VIF driver, and you plan to use Ethernet only in paravirtualized ,mode: change the following:
libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtGenericVIFDriver
3. Modify the /etc/neutron/plugins/mlnx/mlnx_conf.ini file to reflect your environment.
[AGENT] rpc_support_old_agents = True [ESWITCH] physical_interface_mapping - the network_interface_mappings maps each physical network name to the physical interface (on top of Mellanox Adapter) connecting the node to that physical network. The format of this paramter is: <fabric name>:< PF name> (Only releavant on Compute node). PF Name can either be the PF (Physical Function) Name or 'autoeth' for automatic Ethernet configuration,'autoib' for automatic Infiniband configuration.The default is "default:autoeth". vnic_type - type of VM network interface: 'mlnx_direct' or 'hostdev' according to libvirt terminology. hostdev: this is the traditional method of assigning any generic PCI device to a guest (SR-IOV). mlnx_direct: this is a method to provide macvtap device on top of the PCI device (default). bridge: - When using Linux Bridge Plugin on top of eIPoIB device daemon_endpoint - 'tcp://127.0.0.1:60001'
For a plugin configuration file example (Havana), please refer to Mellanox config *ini file (click here)
4. (Optional) Modify /etc/init/neutron-plugin-mlnx-agent.conf as described in LP bug #1257732
5. (Optional) Check that ebrctl is listed somewhere in /etc/nova/rootwrap.d/*, otherwise add this to /etc/nova/rootwrap.d/compute.filters file in the [Filters] section.
ebrctl: CommandFilter, ebrctl, root
Start Services
1. Restart Nova.
#/etc/init.d/nova-compute restart
2. Start eswitch Daemon
#/etc/init.d/eswitchd start
3. Start the Neutron agent
#/etc/init.d/neutron-plugin-mlnx-agent start
Note: eswitch Daemon should be running before the Neutron Agent is started.
Network Node
1. Install the Neutron Linux bridge plugin, the Neutron DHCP agent and the Neutron L3 agent:
# apt-get install neutron-plugin-linuxbridge-agent neutron-dhcp-agent neutron-l3-agent
2. Copy /etc/neutron/neutron.conf from the Compute node.
3. Change the following configuration of the ini file (/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini). The "default" in the example is the name of the physical network as configured in /etc/neutron/plugins/mlnx/mlnx_conf.ini .
[linux_bridge] physical_interface_mappings = default:eth2
4. Configure the DHCP agent according to the following guidelines
Update the following file: /etc/neutron/dhcp_agent.ini with:
[DEFAULT] interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver
For additional information refer to the OpenStack documentation
5. Configure the L3 agent according to the following guidelines
Update the following file: /etc/neutron/l3_agent.ini with:
[DEFAULT] interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver
For additional information refer to the OpenStack documentation
6. Configure the Metadata agent according to the OpenStack documentation
7. Start the Neutron Linux Bridge, DHCP and L3 agents
# restart neutron-plugin-linuxbridge-agent # restart neutron-dhcp-agent # restart neutron-l3-agent # restart neutron-metadata-agent